TEL:+86 0571-28993551
Heavy Metal Online Monitoring Instrument
On-line Vanadium in Water Analyzer
product details

Product Model: T8000-V


System Overview


T8000-V is a fully automatic online vanadium monitoring instrument controlled by an embedded system, which can be used for various water qualities such as river water, surface water, and industrial wastewater.  After the sample is filtered, it is pumped into the reactor.  Firstly, a masking agent is injected to eliminate interfering substances.  Then, the pH value of the solution is adjusted to make it have a suitable pH value.  Then, a characteristic chromogenic agent is added to react with vanadium in water, and the absorbance of the reactants is measured;  Calculate the concentration of vanadium in the sample based on the absorbance value and the correction factor stored in the monitor.




Maintenance Free Design

Water sample pretreatment device adopts the design of free maintenance, to ensure preprocessing device maintenance cycle more than half a year.


Chemical Digestion Time Can Be Adjusted

The chemical digestion time can adjust the measurement process and results to meet the relevant standards of the environmental protection industry and water quality analysis industry.


High Reproducibility

The fully imported components, innovative analytical flow design, and reagent formulation ensure high measurement reproducibility, with a current measurement reproducibility of up to 5%.


Fully Automatic Operation

No need for personnel on duty, it can achieve intelligent functions such as automatic zero adjustment, automatic calibration, automatic measurement, automatic cleaning, automatic maintenance, self-protection, and automatic recovery.


Diversified Online Monitoring Methods

It can achieve measurement methods such as manual measurement at any time, automatic timed measurement, and automatic periodic measurement.


Automatic Liquid Leakage Alarm Function

When there is a reagent leak, the instrument will automatically alarm and prompt the user to perform maintenance.


No Need for Professional Training

Operation and maintenance are extremely simple, without the need for professional training.



Technical parameters


Measurement principle: photoelectric colorimetry;
Range: 0 ~ 0.05\1.0mg/L;
Measurement type: automatic timing, manual, continuous;
Measurement interval: can be set arbitrarily;
Measurement time: approximately 20 minutes;
Measurement accuracy: 10%;
Minimum detection limit: 0.005mg/L;
Reproducibility: 5%;
Signal output: Standard 4-20mA analog output, maximum load 400 ohms or 0-5V, other RS485 or RS232 optional;
Signal input: 1 channel analysis, 1 channel correction;
Sample and waste liquid transport: no pressure; Sample temperature: 10-30℃;
Agent replacement: 3~4 weeks according to the operating temperature changes;
Ambient temperature: 0-40 ℃;
Protection class: IP55;
Power supply: 220VAC;
Weight: ; 45kg (excluding chemicals)
Size: 530×1340×390mm.