TEL:+86 0571-28993551
Company News
Is the Modi Online Phenol Analyzer Used to Detect Phenol Concentration in Water?
Date:2026-11-20 Browse: 3

 

Before learning about the application of Modi online water quality analyzers, let us first understand what phenol is. Phenol is an essential chemical raw material widely applied in the production of bactericides, pharmaceuticals, synthetic fibers, pesticides and other sectors. Phenolic compounds are refractory, highly toxic and persistent organic pollutants. As a protoplasmic poison, phenol poses great health risks to humans. Intake of a certain dose of phenol may trigger acute poisoning. Long-term consumption of phenol-contaminated water can lead to headaches, anemia and other adverse health issues. Severe phenol pollution may also cause fish mortality and crop withering or yield reduction.

Based on boiling points, volatility and the property of being steam-dis-tillable, phenols can be classified into volatile phenols and non-volatile phenols.

What are the main sources of phenol in water? Phenol can be found in wastewater discharged from coking, papermaking, chemical and other industries. Such wastewater cannot be directly discharged. It requires proper treatment, followed by concentration testing with water quality analyzers. Discharge is permitted only after the test results meet relevant standards.

So, is the Modi online phenol analyzer designed to measure phenol concentration in wastewater? The answer is yes. The T8000-ph Online Phenol Analyzer manufactured by Hangzhou Modi is an automatic online monitoring device controlled by an embedded system for phenol concentration detection. It is suitable for surface water, industrial wastewater and other scenarios.

Working principle: After sample filtration, the liquid is pumped into the reaction cell. Masking agents are added to eliminate interference, and the pH value is adjusted to an optimal range. A specific color reagent is then introduced to react with phenol for color development. The absorbance of the reacted solution is measured, and the phenol concentration is calculated using the absorbance value and the calibration factors stored in the analyzer.