Wastewater hardness is commonly found in industrial wastewater and serves as a key parameter for wastewater treatment design. It directly affects the rationality of treatment processes, so it is critical to understand and manage this indicator properly.
- How to check whether wastewater hardness meets discharge standards
Real-time online water quality monitoring is an effective way. A T8000-WH Online Hardness Analyzer can continuously measure hardness values. Test results are compared against official standards to identify compliance or exceedance. Prompt corrective actions should be taken once excessive hardness or abnormal conditions are detected.
- How to treat and control wastewater hardness before and after online monitoring
Total hardness refers to the total concentration of calcium and magnesium ions dissolved in water, conventionally calculated as calcium carbonate equivalent.
If hard water flows into membrane filtration systems, stirring, chemical reactions, aeration and sulfate addition during operation may trigger precipitation of calcium carbonate, magnesium carbonate or calcium sulfate. These solid scales block membrane pores and reduce water output. Ordinary cleaning cannot fully remove such deposits, and acid cleaning is often required. This increases chemical operating costs, and frequent acid washing damages membrane materials and shortens membrane service life. For this reason, enterprises need to reduce influent hardness ahead of membrane systems for scale prevention.
Common hardness reduction processes include the soda-lime method and ion exchange softening. Ion exchange delivers stable treatment performance but requires regular regeneration, making it less ideal for high-hardness and large-flow wastewater systems. The soda-lime process combined with tubular membrane filtration achieves stable hardness removal, and the treated effluent can feed subsequent membrane units directly with good cost efficiency.
Scale inhibition chemicals are suitable for wastewater with relatively low hardness. New anti-scaling technologies are also available for metal pipeline protection. For domestic wastewater, suitable treatment solutions should be selected based on actual site conditions.



