There are cases indicating that due to the backflow of sewage, the medical wastewater treatment tanks were filled with the backflowing sewage, causing some equipment damage and seriously affecting the normal operation of the hospital. In this article, we will explore the issue of sewage backflow and the “strike” of the medical wastewater treatment tanks.
If you see water flowing in from all around in the wastewater treatment tank, and the equipment inside has already been submerged, at this time, the staff need to pump water out from different directions. In fact, in a hospital, such a medical wastewater treatment tank is actually dry inside, and it has some equipment for wastewater treatment installed. Due to the backflow of sewage, the wastewater treatment equipment inside is severely damaged. As a result, the wastewater treatment work cannot be carried out normally, and the situation of the medical wastewater treatment tank “striking” occurs. If such a situation happens, it is necessary to contact relevant departments for handling; otherwise, the hospital’s work cannot run normally, and the consequences can be imagined.
So What are the Consequences of the Medical Wastewater Tank “Striking”?
As mentioned above, the tank inside the wastewater treatment tank is dry, and some wastewater treatment equipment has been installed inside. Due to the backflow of sewage, the wastewater treatment equipment inside is severely damaged. As a result, the wastewater treatment work cannot be carried out normally, and the situation of the medical wastewater treatment tank “striking” occurs. Once it strikes, the wastewater discharged from various medical departments cannot be properly treated and monitored, thus affecting the entire process of the hospital. Therefore, this problem must be solved in a timely manner to ensure that the hospital can operate normally.
How Does the Medical Wastewater Treatment Tank Operate?
In simple terms, it is to put some wastewater generated by the hospital into this tank for corresponding disinfection and sterilization treatment, and then carry out Medical Wastewater Online Monitoring to ensure that the water quality indicators are qualified before discharging. Of course, during the disinfection and sterilization process, the disinfectant itself is also harmful, so the dosage must be controlled. If using chlorine disinfectant, then an RCl900 total residual chlorine online analyzer should be installed to monitor the total residual chlorine in the wastewater in real time to ensure that it does not exceed the limit.
