Many people may not be familiar with the layout of water quality monitoring points. To continuously improve the water environment, it is necessary to learn relevant knowledge about monitoring point arrangement. This article, together with a manufacturer of online water quality monitors, introduces this topic, with layout plans categorized as follows:
- Layout of monitoring points for individual projects
This covers water quality online monitoring point arrangement for roads, residential communities, parks and other similar projects. Monitoring points shall be set at the access manholes of municipal pipelines or discharge outlets of receiving water bodies. Where there are numerous access manholes or discharge outlets, representative points shall be selected for monitoring based on the underlying surface composition within the watershed and the types of runoff pollution sources.
- Regional-based monitoring point layout
When selecting local online water quality monitoring points, key representative nodes in the drainage system shall be chosen according to the objectives of the monitoring network. The monitoring scope covers the drainage area or secondary catchment zone of the region. For monitoring of total runoff volume and total pollution load, confluence points of the watershed or municipal drainage outlets shall be selected. If rainwater from upstream runoff flows into the catchment zone, the upstream inlet points shall also be monitored. Besides, combined overflow monitoring equipment shall be installed at all permanent combined overflow outlets and sewage interception facilities.
- Monitoring point arrangement for receiving water environments
For this scenario, monitoring sections are generally arranged at upstream and downstream cross-sections of water bodies, as well as key nodes including direct confluence locations, main water outlets and boundaries of urban drainage zones. During rainfall events, sampling positions may be affected by horizontal and vertical variations of the water body. In such cases, monitoring vertical lines can be set at the same distance from the confluence. Samples taken from different depths along each vertical line are mixed for testing. Real-time monitoring of pollution at different cross-sections helps assess pollution sources.
Site-specific conditions should be considered for different water areas. The above analysis serves as a general reference for relevant scenarios. In summary, sound water quality monitoring for various water bodies is essential to guarantee water safety.



