The disinfection of medical wastewater remains a critical area of concern within healthcare waste management. A primary challenge for hospitals is determining the most effective and appropriate disinfectant agents. Recently, there has been a notable increase in inquiries regarding Online Reactive Oxygen Species (ROS) Analyzers, predominantly from hospital facilities. This trend indicates that while chlorine-based disinfectants have traditionally dominated the field, ROS are increasingly recognized as viable and common alternatives for hospital wastewater treatment.
For hospital-specific applications, the principal active ingredient in ROS disinfectants is potassium peroxymonosulfate powder. Prior to application, this compound requires an activation process. It is subsequently diluted with water at a ratio of 1:50 to formulate a disinfectant solution, which is then introduced into the disinfection tanks within the medical wastewater treatment infrastructure. Crucially, this process necessitates the use of specialized ROS dosing systems. The operational parameters must be calibrated according to the specific discharge volumes and regulatory standards applicable to each facility. Following equipment configuration, real-time monitoring of the injected ROS concentration is essential to ensure effluent quality compliance, representing a scientifically rigorous and economically efficient approach.
From a physicochemical perspective, Reactive Oxygen Species refer to chemically reactive molecules containing oxygen that occur naturally in biological systems and environmental matrices. Under standard ambient temperature and pressure conditions, the aqueous solubility of these species is approximately thirteen times higher than that of molecular oxygen ($O_2$). Furthermore, while they exhibit stability under controlled conditions, they readily decompose into oxygen. However, it is important to note that excessive concentrations of endogenous ROS in human physiology can induce oxidative stress, leading to severe cellular damage; thus, strict safety protocols are imperative during handling and operation.
Consequently, operators must precisely control ROS dosage rates to ensure that residual concentrations in the treated effluent adhere to established regulatory limits before discharge. It should be emphasized that while ROS monitoring is vital, it constitutes only one component of Online Monitoring of Medical Wastewater and comprehensive medical wastewater surveillance. To guarantee full regulatory compliance, the effluent must also undergo simultaneous monitoring for conventional physicochemical parameters—including Chemical Oxygen Demand (COD) and Ammonia Nitrogen—and microbiological indicators, specifically total coliforms and fecal coliforms. Only upon verification that all pollutant metrics meet statutory thresholds may the treated wastewater be safely discharged.



