Large volumes of industrial wastewater and domestic sewage discharge have led to excessive pollutant concentrations in water bodies. The self-purification capacity of water cannot fully remove these pollutants, which alter the biological and chemical properties of water and result in water pollution. Wastewater monitoring enables real-time detection of polluted water, helping track water quality changes and contain the spread of water pollution.
However, wastewater monitoring results are susceptible to interference from environmental conditions, testing methods, human operation and other factors. These interference’s may introduce errors and compromise the authenticity of monitoring data. Operators need to reduce such errors through data optimization, evaluate data accuracy, identify error sources and impacts, and screen invalid parameters to guarantee reliable test results.
This article discusses key considerations regarding errors in wastewater monitoring results.
- Errors can be divided into direct and indirect types. Direct errors mainly stem from instrument issues such as incomplete calibration. Indirect errors are usually caused by environmental factors or non-standard operation by staff. Efforts should be made to minimize both types of errors.
- Errors from repeated measurements. Discrepancies may exist among multiple test results for the same sample. It is necessary to adjust measured values appropriately so that the data can better reflect the actual water quality condition.
- Mismatched measurement ranges. Significant errors will occur when the target water quality parameter range exceeds the applicable range of the instrument. Therefore, we recommend confirming the required measuring range before purchasing monitoring instruments to avoid large measurement deviations caused by inappropriate ranges.
- PREVIOUS:Where is Disinfected Wastewater Used?
- NEXT:



