In the process of chemical water treatment, it mainly refers to the general term for clear water, desalinated water, steam cooling water, etc. obtained after various water treatments of raw water. Many industrial process water treatments take chemical water as the initial important means. As for the specific methods and degrees of water quality treatment, they are determined according to the specific circumstances.

This Article Provides a Brief Explanation of the Hardness Monitoring of Chemical Water!

For instance, in water sources such as low-pressure boiler feed water, dealkali-softened water, process water and steam condensate water, the hardness index needs to be controlled within the specified range. At this point, the T8000-WH online water hardness analyzer produced by Hangzhou Modi can be used to monitor the hardness in water in real time. However, because the cleanliness of these waters is very high, no pretreatment is required after sampling and they can be directly sent to the analyzer for analysis. However, for a few sampling points that are under high temperature or high pressure, the sample needs to be depressurized and cooled down before analysis. There is also a part of the key analysis points, which will involve the interlocking issue between the instrument and the control monitoring system. At this time, the analyzer needs to be able to issue a warning output for the analysis results that exceed the limit value.